ghostty: wallust

5 files changed, 63 insertions, 2250 deletions

diff --git a/dot-config/ghostty/binds.conf b/dot-config/ghostty/binds.conf
new file mode 100644
index 00000000..1977e557
--- /dev/null
+++ b/dot-config/ghostty/binds.conf
@@ -0,0 +1,29 @@
+keybind = ctrl+alt+up=unbind
+keybind = ctrl+page_down=unbind
+keybind = alt+five=unbind
+keybind = super+ctrl+right_bracket=unbind
+keybind = ctrl+shift+o=unbind
+keybind = ctrl+shift+q=unbind
+keybind = ctrl+shift+n=unbind
+keybind = ctrl+shift+comma=unbind
+keybind = alt+eight=unbind
+keybind = alt+three=unbind
+keybind = ctrl+enter=text:\n
+keybind = shift+enter=text:\n
+keybind = ctrl+page_up=unbind
+keybind = ctrl+tab=unbind
+keybind = ctrl+alt+left=unbind
+keybind = ctrl+shift+right=unbind
+keybind = alt+nine=unbind
+keybind = ctrl+shift+t=unbind
+keybind = ctrl+shift+tab=unbind
+keybind = alt+two=unbind
+keybind = ctrl+alt+down=unbind
+keybind = alt+four=unbind
+keybind = ctrl+alt+right=unbind
+keybind = alt+f4=unbind
+keybind = alt+one=unbind
+keybind = super+ctrl+left_bracket=unbind
+keybind = alt+six=unbind
+keybind = alt+seven=unbind
+
diff --git a/dot-config/ghostty/config b/dot-config/ghostty/config
index 72f0819f..8ed5cdb8 100644
--- a/dot-config/ghostty/config
+++ b/dot-config/ghostty/config
@@ -1,42 +1,20 @@
-background = #000000
 background-opacity = 0.5
 class = ghostty
-keybind = ctrl+alt+up=unbind
-keybind = ctrl+page_down=unbind
-keybind = alt+five=unbind
-keybind = super+ctrl+right_bracket=unbind
-keybind = ctrl+shift+o=unbind
-keybind = ctrl+shift+q=unbind
-keybind = ctrl+shift+n=unbind
-keybind = ctrl+shift+comma=unbind
-keybind = alt+eight=unbind
-keybind = alt+three=unbind
-keybind = ctrl+enter=text:\n
-keybind = shift+enter=text:\n
-keybind = ctrl+page_up=unbind
-keybind = ctrl+tab=unbind
-keybind = ctrl+alt+left=unbind
-keybind = ctrl+shift+right=unbind
-keybind = alt+nine=unbind
-keybind = ctrl+shift+t=unbind
-keybind = ctrl+shift+tab=unbind
-keybind = alt+two=unbind
-keybind = ctrl+alt+down=unbind
-keybind = alt+four=unbind
-keybind = ctrl+alt+right=unbind
-keybind = alt+f4=unbind
-keybind = alt+one=unbind
-keybind = super+ctrl+left_bracket=unbind
-keybind = alt+six=unbind
-keybind = alt+seven=unbind
+
 window-padding-x = 0
 window-padding-y = 0
 window-inherit-working-directory = true
-window-decoration = false
+window-decoration = none
 window-colorspace = display-p3
+
 resize-overlay = never
 confirm-close-surface = false
-gtk-titlebar = false
+#gtk-titlebar = false
 term = ghostty
-auto-update = off
 clipboard-paste-protection = false
+gtk-single-instance = true
+
+#minimum-contrast = 2
+
+config-file = binds.conf
+config-file = colors.conf
diff --git a/dot-config/ghostty/config.full b/dot-config/ghostty/config.full
deleted file mode 100644
index c69cc2a2..00000000
--- a/dot-config/ghostty/config.full
+++ /dev/null
@@ -1,2216 +0,0 @@
-# The font families to use.
-# 
-# You can generate the list of valid values using the CLI:
-# 
-#     ghostty +list-fonts
-# 
-# This configuration can be repeated multiple times to specify preferred
-# fallback fonts when the requested codepoint is not available in the primary
-# font. This is particularly useful for multiple languages, symbolic fonts,
-# etc.
-# 
-# Notes on emoji specifically: On macOS, Ghostty by default will always use
-# Apple Color Emoji and on Linux will always use Noto Emoji. You can
-# override this behavior by specifying a font family here that contains
-# emoji glyphs.
-# 
-# The specific styles (bold, italic, bold italic) do not need to be
-# explicitly set. If a style is not set, then the regular style (font-family)
-# will be searched for stylistic variants. If a stylistic variant is not
-# found, Ghostty will use the regular style. This prevents falling back to a
-# different font family just to get a style such as bold. This also applies
-# if you explicitly specify a font family for a style. For example, if you
-# set `font-family-bold = FooBar` and "FooBar" cannot be found, Ghostty will
-# use whatever font is set for `font-family` for the bold style.
-# 
-# Finally, some styles may be synthesized if they are not supported.
-# For example, if a font does not have an italic style and no alternative
-# italic font is specified, Ghostty will synthesize an italic style by
-# applying a slant to the regular style. If you want to disable these
-# synthesized styles then you can use the `font-style` configurations
-# as documented below.
-# 
-# You can disable styles completely by using the `font-style` set of
-# configurations. See the documentation for `font-style` for more information.
-# 
-# If you want to overwrite a previous set value rather than append a fallback,
-# specify the value as `""` (empty string) to reset the list and then set the
-# new values. For example:
-# 
-#     font-family = ""
-#     font-family = "My Favorite Font"
-# 
-# Setting any of these as CLI arguments will automatically clear the
-# values set in configuration files so you don't need to specify
-# `--font-family=""` before setting a new value. You only need to specify
-# this within config files if you want to clear previously set values in
-# configuration files or on the CLI if you want to clear values set on the
-# CLI.
-# 
-# Changing this configuration at runtime will only affect new terminals, i.e.
-# new windows, tabs, etc.
-font-family = 
-
-font-family-bold = 
-font-family-italic = 
-font-family-bold-italic = 
-# The named font style to use for each of the requested terminal font styles.
-# This looks up the style based on the font style string advertised by the
-# font itself. For example, "Iosevka Heavy" has a style of "Heavy".
-# 
-# You can also use these fields to completely disable a font style. If you set
-# the value of the configuration below to literal `false` then that font style
-# will be disabled. If the running program in the terminal requests a disabled
-# font style, the regular font style will be used instead.
-# 
-# These are only valid if its corresponding font-family is also specified. If
-# no font-family is specified, then the font-style is ignored unless you're
-# disabling the font style.
-font-style = default
-
-font-style-bold = default
-font-style-italic = default
-font-style-bold-italic = default
-# Control whether Ghostty should synthesize a style if the requested style is
-# not available in the specified font-family.
-# 
-# Ghostty can synthesize bold, italic, and bold italic styles if the font
-# does not have a specific style. For bold, this is done by drawing an
-# outline around the glyph of varying thickness. For italic, this is done by
-# applying a slant to the glyph. For bold italic, both of these are applied.
-# 
-# Synthetic styles are not perfect and will generally not look as good
-# as a font that has the style natively. However, they are useful to
-# provide styled text when the font does not have the style.
-# 
-# Set this to "false" or "true" to disable or enable synthetic styles
-# completely. You can disable specific styles using "no-bold", "no-italic",
-# and "no-bold-italic". You can disable multiple styles by separating them
-# with a comma. For example, "no-bold,no-italic".
-# 
-# Available style keys are: `bold`, `italic`, `bold-italic`.
-# 
-# If synthetic styles are disabled, then the regular style will be used
-# instead if the requested style is not available. If the font has the
-# requested style, then the font will be used as-is since the style is
-# not synthetic.
-# 
-# Warning: An easy mistake is to disable `bold` or `italic` but not
-# `bold-italic`. Disabling only `bold` or `italic` will NOT disable either
-# in the `bold-italic` style. If you want to disable `bold-italic`, you must
-# explicitly disable it. You cannot partially disable `bold-italic`.
-# 
-# By default, synthetic styles are enabled.
-font-synthetic-style = bold,italic,bold-italic
-
-# Apply a font feature. This can be repeated multiple times to enable multiple
-# font features. You can NOT set multiple font features with a single value
-# (yet).
-# 
-# The font feature will apply to all fonts rendered by Ghostty. A future
-# enhancement will allow targeting specific faces.
-# 
-# A valid value is the name of a feature. Prefix the feature with a `-` to
-# explicitly disable it. Example: `ss20` or `-ss20`.
-# 
-# To disable programming ligatures, use `-calt` since this is the typical
-# feature name for programming ligatures. To look into what font features
-# your font has and what they do, use a font inspection tool such as
-# [fontdrop.info](https://fontdrop.info).
-# 
-# To generally disable most ligatures, use `-calt`, `-liga`, and `-dlig` (as
-# separate repetitive entries in your config).
-font-feature = 
-
-# Font size in points. This value can be a non-integer and the nearest integer
-# pixel size will be selected. If you have a high dpi display where 1pt = 2px
-# then you can get an odd numbered pixel size by specifying a half point.
-# 
-# For example, 13.5pt @ 2px/pt = 27px
-# 
-# Changing this configuration at runtime will only affect new terminals,
-# i.e. new windows, tabs, etc. Note that you may still not see the change
-# depending on your `window-inherit-font-size` setting. If that setting is
-# true, only the first window will be affected by this change since all
-# subsequent windows will inherit the font size of the previous window.
-font-size = 12
-
-# A repeatable configuration to set one or more font variations values for
-# a variable font. A variable font is a single font, usually with a filename
-# ending in `-VF.ttf` or `-VF.otf` that contains one or more configurable axes
-# for things such as weight, slant, etc. Not all fonts support variations;
-# only fonts that explicitly state they are variable fonts will work.
-# 
-# The format of this is `id=value` where `id` is the axis identifier. An axis
-# identifier is always a 4 character string, such as `wght`. To get the list
-# of supported axes, look at your font documentation or use a font inspection
-# tool.
-# 
-# Invalid ids and values are usually ignored. For example, if a font only
-# supports weights from 100 to 700, setting `wght=800` will do nothing (it
-# will not be clamped to 700). You must consult your font's documentation to
-# see what values are supported.
-# 
-# Common axes are: `wght` (weight), `slnt` (slant), `ital` (italic), `opsz`
-# (optical size), `wdth` (width), `GRAD` (gradient), etc.
-font-variation = 
-
-font-variation-bold = 
-font-variation-italic = 
-font-variation-bold-italic = 
-# Force one or a range of Unicode codepoints to map to a specific named font.
-# This is useful if you want to support special symbols or if you want to use
-# specific glyphs that render better for your specific font.
-# 
-# The syntax is `codepoint=fontname` where `codepoint` is either a single
-# codepoint or a range. Codepoints must be specified as full Unicode
-# hex values, such as `U+ABCD`. Codepoints ranges are specified as
-# `U+ABCD-U+DEFG`. You can specify multiple ranges for the same font separated
-# by commas, such as `U+ABCD-U+DEFG,U+1234-U+5678=fontname`. The font name is
-# the same value as you would use for `font-family`.
-# 
-# This configuration can be repeated multiple times to specify multiple
-# codepoint mappings.
-# 
-# Changing this configuration at runtime will only affect new terminals,
-# i.e. new windows, tabs, etc.
-font-codepoint-map = 
-
-# Draw fonts with a thicker stroke, if supported. This is only supported
-# currently on macOS.
-font-thicken = false
-
-# All of the configurations behavior adjust various metrics determined by the
-# font. The values can be integers (1, -1, etc.) or a percentage (20%, -15%,
-# etc.). In each case, the values represent the amount to change the original
-# value.
-# 
-# For example, a value of `1` increases the value by 1; it does not set it to
-# literally 1. A value of `20%` increases the value by 20%. And so on.
-# 
-# There is little to no validation on these values so the wrong values (i.e.
-# `-100%`) can cause the terminal to be unusable. Use with caution and reason.
-# 
-# Some values are clamped to minimum or maximum values. This can make it
-# appear that certain values are ignored. For example, many `*-thickness`
-# adjustments cannot go below 1px.
-# 
-# `adjust-cell-height` has some additional behaviors to describe:
-# 
-#   * The font will be centered vertically in the cell.
-# 
-#   * The cursor will remain the same size as the font, but may be
-#     adjusted separately with `adjust-cursor-height`.
-# 
-#   * Powerline glyphs will be adjusted along with the cell height so
-#     that things like status lines continue to look aligned.
-adjust-cell-width = 
-
-adjust-cell-height = 
-# Distance in pixels from the bottom of the cell to the text baseline.
-# Increase to move baseline UP, decrease to move baseline DOWN.
-adjust-font-baseline = 
-
-# Distance in pixels from the top of the cell to the top of the underline.
-# Increase to move underline DOWN, decrease to move underline UP.
-adjust-underline-position = 
-
-# Thickness in pixels of the underline.
-adjust-underline-thickness = 
-
-# Distance in pixels from the top of the cell to the top of the strikethrough.
-# Increase to move strikethrough DOWN, decrease to move underline UP.
-adjust-strikethrough-position = 
-
-# Thickness in pixels of the strikethrough.
-adjust-strikethrough-thickness = 
-
-# Distance in pixels from the top of the cell to the top of the overline.
-# Increase to move overline DOWN, decrease to move underline UP.
-adjust-overline-position = 
-
-# Thickness in pixels of the overline.
-adjust-overline-thickness = 
-
-# Thickness in pixels of the bar cursor and outlined rect cursor.
-adjust-cursor-thickness = 
-
-# Height in pixels of the cursor. Currently applies to all cursor types:
-# bar, rect, and outlined rect.
-adjust-cursor-height = 
-
-# Thickness in pixels of box drawing characters.
-adjust-box-thickness = 
-
-# The method to use for calculating the cell width of a grapheme cluster.
-# The default value is `unicode` which uses the Unicode standard to determine
-# grapheme width. This results in correct grapheme width but may result in
-# cursor-desync issues with some programs (such as shells) that may use a
-# legacy method such as `wcswidth`.
-# 
-# Valid values are:
-# 
-# * `legacy` - Use a legacy method to determine grapheme width, such as
-#   wcswidth This maximizes compatibility with legacy programs but may result
-#   in incorrect grapheme width for certain graphemes such as skin-tone
-#   emoji, non-English characters, etc.
-# 
-#   This is called "legacy" and not something more specific because the
-#   behavior is undefined and we want to retain the ability to modify it.
-#   For example, we may or may not use libc `wcswidth` now or in the future.
-# 
-# * `unicode` - Use the Unicode standard to determine grapheme width.
-# 
-# If a running program explicitly enables terminal mode 2027, then `unicode`
-# width will be forced regardless of this configuration. When mode 2027 is
-# reset, this configuration will be used again.
-# 
-# This configuration can be changed at runtime but will not affect existing
-# terminals. Only new terminals will use the new configuration.
-grapheme-width-method = unicode
-
-# FreeType load flags to enable. The format of this is a list of flags to
-# enable separated by commas. If you prefix a flag with `no-` then it is
-# disabled. If you omit a flag, it's default value is used, so you must
-# explicitly disable flags you don't want. You can also use `true` or `false`
-# to turn all flags on or off.
-# 
-# This configuration only applies to Ghostty builds that use FreeType.
-# This is usually the case only for Linux builds. macOS uses CoreText
-# and does not have an equivalent configuration.
-# 
-# Available flags:
-# 
-#   * `hinting` - Enable or disable hinting, enabled by default.
-#   * `force-autohint` - Use the freetype auto-hinter rather than the
-#     font's native hinter. Enabled by default.
-#   * `monochrome` - Instructs renderer to use 1-bit monochrome
-#     rendering. This option doesn't impact the hinter.
-#     Enabled by default.
-#   * `autohint` - Use the freetype auto-hinter. Enabled by default.
-# 
-# Example: `hinting`, `no-hinting`, `force-autohint`, `no-force-autohint`
-freetype-load-flags = hinting,force-autohint,monochrome,autohint
-
-# A theme to use. This can be a built-in theme name, a custom theme
-# name, or an absolute path to a custom theme file. Ghostty also supports
-# specifying a different theme to use for light and dark mode. Each
-# option is documented below.
-# 
-# If the theme is an absolute pathname, Ghostty will attempt to load that
-# file as a theme. If that file does not exist or is inaccessible, an error
-# will be logged and no other directories will be searched.
-# 
-# If the theme is not an absolute pathname, two different directories will be
-# searched for a file name that matches the theme. This is case sensitive on
-# systems with case-sensitive filesystems. It is an error for a theme name to
-# include path separators unless it is an absolute pathname.
-# 
-# The first directory is the `themes` subdirectory of your Ghostty
-# configuration directory. This is `$XDG_CONFIG_DIR/ghostty/themes` or
-# `~/.config/ghostty/themes`.
-# 
-# The second directory is the `themes` subdirectory of the Ghostty resources
-# directory. Ghostty ships with a multitude of themes that will be installed
-# into this directory. On macOS, this list is in the
-# `Ghostty.app/Contents/Resources/ghostty/themes` directory. On Linux, this
-# list is in the `share/ghostty/themes` directory (wherever you installed the
-# Ghostty "share" directory.
-# 
-# To see a list of available themes, run `ghostty +list-themes`.
-# 
-# A theme file is simply another Ghostty configuration file. They share
-# the same syntax and same configuration options. A theme can set any valid
-# configuration option so please do not use a theme file from an untrusted
-# source. The built-in themes are audited to only set safe configuration
-# options.
-# 
-# Some options cannot be set within theme files. The reason these are not
-# supported should be self-evident. A theme file cannot set `theme` or
-# `config-file`. At the time of writing this, Ghostty will not show any
-# warnings or errors if you set these options in a theme file but they will
-# be silently ignored.
-# 
-# Any additional colors specified via background, foreground, palette, etc.
-# will override the colors specified in the theme.
-# 
-# To specify a different theme for light and dark mode, use the following
-# syntax: `light:theme-name,dark:theme-name`. For example:
-# `light:rose-pine-dawn,dark:rose-pine`. Whitespace around all values are
-# trimmed and order of light and dark does not matter. Both light and dark
-# must be specified in this form. In this form, the theme used will be
-# based on the current desktop environment theme.
-# 
-# There are some known bugs with light/dark mode theming. These will
-# be fixed in a future update:
-# 
-#   - macOS: titlebar tabs style is not updated when switching themes.
-# 
-theme = 
-
-# Background color for the window.
-background = #000000
-
-# Foreground color for the window.
-foreground = #ffffff
-
-# The foreground and background color for selection. If this is not set, then
-# the selection color is just the inverted window background and foreground
-# (note: not to be confused with the cell bg/fg).
-selection-foreground = 
-
-selection-background = 
-# Swap the foreground and background colors of cells for selection. This
-# option overrides the `selection-foreground` and `selection-background`
-# options.
-# 
-# If you select across cells with differing foregrounds and backgrounds, the
-# selection color will vary across the selection.
-selection-invert-fg-bg = false
-
-# The minimum contrast ratio between the foreground and background colors.
-# The contrast ratio is a value between 1 and 21. A value of 1 allows for no
-# contrast (i.e. black on black). This value is the contrast ratio as defined
-# by the [WCAG 2.0 specification](https://www.w3.org/TR/WCAG20/).
-# 
-# If you want to avoid invisible text (same color as background), a value of
-# 1.1 is a good value. If you want to avoid text that is difficult to read, a
-# value of 3 or higher is a good value. The higher the value, the more likely
-# that text will become black or white.
-# 
-# This value does not apply to Emoji or images.
-minimum-contrast = 1
-
-# Color palette for the 256 color form that many terminal applications use.
-# The syntax of this configuration is `N=HEXCODE` where `N` is 0 to 255 (for
-# the 256 colors in the terminal color table) and `HEXCODE` is a typical RGB
-# color code such as `#AABBCC`.
-# 
-# For definitions on all the codes [see this cheat
-# sheet](https://www.ditig.com/256-colors-cheat-sheet).
-palette = 0=#1d1f21
-palette = 1=#cc6666
-palette = 2=#b5bd68
-palette = 3=#f0c674
-palette = 4=#81a2be
-palette = 5=#b294bb
-palette = 6=#8abeb7
-palette = 7=#c5c8c6
-palette = 8=#666666
-palette = 9=#d54e53
-palette = 10=#b9ca4a
-palette = 11=#e7c547
-palette = 12=#7aa6da
-palette = 13=#c397d8
-palette = 14=#70c0b1
-palette = 15=#eaeaea
-palette = 16=#000000
-palette = 17=#00005f
-palette = 18=#000087
-palette = 19=#0000af
-palette = 20=#0000d7
-palette = 21=#0000ff
-palette = 22=#005f00
-palette = 23=#005f5f
-palette = 24=#005f87
-palette = 25=#005faf
-palette = 26=#005fd7
-palette = 27=#005fff
-palette = 28=#008700
-palette = 29=#00875f
-palette = 30=#008787
-palette = 31=#0087af
-palette = 32=#0087d7
-palette = 33=#0087ff
-palette = 34=#00af00
-palette = 35=#00af5f
-palette = 36=#00af87
-palette = 37=#00afaf
-palette = 38=#00afd7
-palette = 39=#00afff
-palette = 40=#00d700
-palette = 41=#00d75f
-palette = 42=#00d787
-palette = 43=#00d7af
-palette = 44=#00d7d7
-palette = 45=#00d7ff
-palette = 46=#00ff00
-palette = 47=#00ff5f
-palette = 48=#00ff87
-palette = 49=#00ffaf
-palette = 50=#00ffd7
-palette = 51=#00ffff
-palette = 52=#5f0000
-palette = 53=#5f005f
-palette = 54=#5f0087
-palette = 55=#5f00af
-palette = 56=#5f00d7
-palette = 57=#5f00ff
-palette = 58=#5f5f00
-palette = 59=#5f5f5f
-palette = 60=#5f5f87
-palette = 61=#5f5faf
-palette = 62=#5f5fd7
-palette = 63=#5f5fff
-palette = 64=#5f8700
-palette = 65=#5f875f
-palette = 66=#5f8787
-palette = 67=#5f87af
-palette = 68=#5f87d7
-palette = 69=#5f87ff
-palette = 70=#5faf00
-palette = 71=#5faf5f
-palette = 72=#5faf87
-palette = 73=#5fafaf
-palette = 74=#5fafd7
-palette = 75=#5fafff
-palette = 76=#5fd700
-palette = 77=#5fd75f
-palette = 78=#5fd787
-palette = 79=#5fd7af
-palette = 80=#5fd7d7
-palette = 81=#5fd7ff
-palette = 82=#5fff00
-palette = 83=#5fff5f
-palette = 84=#5fff87
-palette = 85=#5fffaf
-palette = 86=#5fffd7
-palette = 87=#5fffff
-palette = 88=#870000
-palette = 89=#87005f
-palette = 90=#870087
-palette = 91=#8700af
-palette = 92=#8700d7
-palette = 93=#8700ff
-palette = 94=#875f00
-palette = 95=#875f5f
-palette = 96=#875f87
-palette = 97=#875faf
-palette = 98=#875fd7
-palette = 99=#875fff
-palette = 100=#878700
-palette = 101=#87875f
-palette = 102=#878787
-palette = 103=#8787af
-palette = 104=#8787d7
-palette = 105=#8787ff
-palette = 106=#87af00
-palette = 107=#87af5f
-palette = 108=#87af87
-palette = 109=#87afaf
-palette = 110=#87afd7
-palette = 111=#87afff
-palette = 112=#87d700
-palette = 113=#87d75f
-palette = 114=#87d787
-palette = 115=#87d7af
-palette = 116=#87d7d7
-palette = 117=#87d7ff
-palette = 118=#87ff00
-palette = 119=#87ff5f
-palette = 120=#87ff87
-palette = 121=#87ffaf
-palette = 122=#87ffd7
-palette = 123=#87ffff
-palette = 124=#af0000
-palette = 125=#af005f
-palette = 126=#af0087
-palette = 127=#af00af
-palette = 128=#af00d7
-palette = 129=#af00ff
-palette = 130=#af5f00
-palette = 131=#af5f5f
-palette = 132=#af5f87
-palette = 133=#af5faf
-palette = 134=#af5fd7
-palette = 135=#af5fff
-palette = 136=#af8700
-palette = 137=#af875f
-palette = 138=#af8787
-palette = 139=#af87af
-palette = 140=#af87d7
-palette = 141=#af87ff
-palette = 142=#afaf00
-palette = 143=#afaf5f
-palette = 144=#afaf87
-palette = 145=#afafaf
-palette = 146=#afafd7
-palette = 147=#afafff
-palette = 148=#afd700
-palette = 149=#afd75f
-palette = 150=#afd787
-palette = 151=#afd7af
-palette = 152=#afd7d7
-palette = 153=#afd7ff
-palette = 154=#afff00
-palette = 155=#afff5f
-palette = 156=#afff87
-palette = 157=#afffaf
-palette = 158=#afffd7
-palette = 159=#afffff
-palette = 160=#d70000
-palette = 161=#d7005f
-palette = 162=#d70087
-palette = 163=#d700af
-palette = 164=#d700d7
-palette = 165=#d700ff
-palette = 166=#d75f00
-palette = 167=#d75f5f
-palette = 168=#d75f87
-palette = 169=#d75faf
-palette = 170=#d75fd7
-palette = 171=#d75fff
-palette = 172=#d78700
-palette = 173=#d7875f
-palette = 174=#d78787
-palette = 175=#d787af
-palette = 176=#d787d7
-palette = 177=#d787ff
-palette = 178=#d7af00
-palette = 179=#d7af5f
-palette = 180=#d7af87
-palette = 181=#d7afaf
-palette = 182=#d7afd7
-palette = 183=#d7afff
-palette = 184=#d7d700
-palette = 185=#d7d75f
-palette = 186=#d7d787
-palette = 187=#d7d7af
-palette = 188=#d7d7d7
-palette = 189=#d7d7ff
-palette = 190=#d7ff00
-palette = 191=#d7ff5f
-palette = 192=#d7ff87
-palette = 193=#d7ffaf
-palette = 194=#d7ffd7
-palette = 195=#d7ffff
-palette = 196=#ff0000
-palette = 197=#ff005f
-palette = 198=#ff0087
-palette = 199=#ff00af
-palette = 200=#ff00d7
-palette = 201=#ff00ff
-palette = 202=#ff5f00
-palette = 203=#ff5f5f
-palette = 204=#ff5f87
-palette = 205=#ff5faf
-palette = 206=#ff5fd7
-palette = 207=#ff5fff
-palette = 208=#ff8700
-palette = 209=#ff875f
-palette = 210=#ff8787
-palette = 211=#ff87af
-palette = 212=#ff87d7
-palette = 213=#ff87ff
-palette = 214=#ffaf00
-palette = 215=#ffaf5f
-palette = 216=#ffaf87
-palette = 217=#ffafaf
-palette = 218=#ffafd7
-palette = 219=#ffafff
-palette = 220=#ffd700
-palette = 221=#ffd75f
-palette = 222=#ffd787
-palette = 223=#ffd7af
-palette = 224=#ffd7d7
-palette = 225=#ffd7ff
-palette = 226=#ffff00
-palette = 227=#ffff5f
-palette = 228=#ffff87
-palette = 229=#ffffaf
-palette = 230=#ffffd7
-palette = 231=#ffffff
-palette = 232=#080808
-palette = 233=#121212
-palette = 234=#1c1c1c
-palette = 235=#262626
-palette = 236=#303030
-palette = 237=#3a3a3a
-palette = 238=#444444
-palette = 239=#4e4e4e
-palette = 240=#585858
-palette = 241=#626262
-palette = 242=#6c6c6c
-palette = 243=#767676
-palette = 244=#808080
-palette = 245=#8a8a8a
-palette = 246=#949494
-palette = 247=#9e9e9e
-palette = 248=#a8a8a8
-palette = 249=#b2b2b2
-palette = 250=#bcbcbc
-palette = 251=#c6c6c6
-palette = 252=#d0d0d0
-palette = 253=#dadada
-palette = 254=#e4e4e4
-palette = 255=#eeeeee
-
-# The color of the cursor. If this is not set, a default will be chosen.
-cursor-color = 
-
-# Swap the foreground and background colors of the cell under the cursor. This
-# option overrides the `cursor-color` and `cursor-text` options.
-cursor-invert-fg-bg = false
-
-# The opacity level (opposite of transparency) of the cursor. A value of 1
-# is fully opaque and a value of 0 is fully transparent. A value less than 0
-# or greater than 1 will be clamped to the nearest valid value. Note that a
-# sufficiently small value such as 0.3 may be effectively invisible and may
-# make it difficult to find the cursor.
-cursor-opacity = 1
-
-# The style of the cursor. This sets the default style. A running program can
-# still request an explicit cursor style using escape sequences (such as `CSI
-# q`). Shell configurations will often request specific cursor styles.
-# 
-# Note that shell integration will automatically set the cursor to a bar at
-# a prompt, regardless of this configuration. You can disable that behavior
-# by specifying `shell-integration-features = no-cursor` or disabling shell
-# integration entirely.
-# 
-# Valid values are:
-# 
-#   * `block`
-#   * `bar`
-#   * `underline`
-#   * `block_hollow`
-# 
-cursor-style = block
-
-# Sets the default blinking state of the cursor. This is just the default
-# state; running programs may override the cursor style using `DECSCUSR` (`CSI
-# q`).
-# 
-# If this is not set, the cursor blinks by default. Note that this is not the
-# same as a "true" value, as noted below.
-# 
-# If this is not set at all (`null`), then Ghostty will respect DEC Mode 12
-# (AT&T cursor blink) as an alternate approach to turning blinking on/off. If
-# this is set to any value other than null, DEC mode 12 will be ignored but
-# `DECSCUSR` will still be respected.
-# 
-# Valid values are:
-# 
-#   * `` (blank)
-#   * `true`
-#   * `false`
-# 
-cursor-style-blink = 
-
-# The color of the text under the cursor. If this is not set, a default will
-# be chosen.
-cursor-text = 
-
-# Enables the ability to move the cursor at prompts by using `alt+click` on
-# Linux and `option+click` on macOS.
-# 
-# This feature requires shell integration (specifically prompt marking
-# via `OSC 133`) and only works in primary screen mode. Alternate screen
-# applications like vim usually have their own version of this feature but
-# this configuration doesn't control that.
-# 
-# It should be noted that this feature works by translating your desired
-# position into a series of synthetic arrow key movements, so some weird
-# behavior around edge cases are to be expected. This is unfortunately how
-# this feature is implemented across terminals because there isn't any other
-# way to implement it.
-cursor-click-to-move = true
-
-# Hide the mouse immediately when typing. The mouse becomes visible again
-# when the mouse is used (button, movement, etc.). Platform-specific behavior
-# may dictate other scenarios where the mouse is shown. For example on macOS,
-# the mouse is shown again when a new window, tab, or split is created.
-mouse-hide-while-typing = false
-
-# Determines whether running programs can detect the shift key pressed with a
-# mouse click. Typically, the shift key is used to extend mouse selection.
-# 
-# The default value of `false` means that the shift key is not sent with
-# the mouse protocol and will extend the selection. This value can be
-# conditionally overridden by the running program with the `XTSHIFTESCAPE`
-# sequence.
-# 
-# The value `true` means that the shift key is sent with the mouse protocol
-# but the running program can override this behavior with `XTSHIFTESCAPE`.
-# 
-# The value `never` is the same as `false` but the running program cannot
-# override this behavior with `XTSHIFTESCAPE`. The value `always` is the
-# same as `true` but the running program cannot override this behavior with
-# `XTSHIFTESCAPE`.
-# 
-# If you always want shift to extend mouse selection even if the program
-# requests otherwise, set this to `never`.
-# 
-# Valid values are:
-# 
-#   * `true`
-#   * `false`
-#   * `always`
-#   * `never`
-# 
-mouse-shift-capture = false
-
-# Multiplier for scrolling distance with the mouse wheel. Any value less
-# than 0.01 or greater than 10,000 will be clamped to the nearest valid
-# value.
-# 
-# A value of "1" (default) scrolls te default amount. A value of "2" scrolls
-# double the default amount. A value of "0.5" scrolls half the default amount.
-# Et cetera.
-mouse-scroll-multiplier = 1
-
-# The opacity level (opposite of transparency) of the background. A value of
-# 1 is fully opaque and a value of 0 is fully transparent. A value less than 0
-# or greater than 1 will be clamped to the nearest valid value.
-# 
-# On macOS, background opacity is disabled when the terminal enters native
-# fullscreen. This is because the background becomes gray and it can cause
-# widgets to show through which isn't generally desirable.
-background-opacity = 0.5
-
-# A positive value enables blurring of the background when background-opacity
-# is less than 1. The value is the blur radius to apply. A value of 20
-# is reasonable for a good looking blur. Higher values will cause strange
-# rendering issues as well as performance issues.
-# 
-# This is only supported on macOS.
-background-blur-radius = 0
-
-# The opacity level (opposite of transparency) of an unfocused split.
-# Unfocused splits by default are slightly faded out to make it easier to see
-# which split is focused. To disable this feature, set this value to 1.
-# 
-# A value of 1 is fully opaque and a value of 0 is fully transparent. Because
-# "0" is not useful (it makes the window look very weird), the minimum value
-# is 0.15. This value still looks weird but you can at least see what's going
-# on. A value outside of the range 0.15 to 1 will be clamped to the nearest
-# valid value.
-unfocused-split-opacity = 0.7
-
-# The color to dim the unfocused split. Unfocused splits are dimmed by
-# rendering a semi-transparent rectangle over the split. This sets the color of
-# that rectangle and can be used to carefully control the dimming effect.
-# 
-# This will default to the background color.
-unfocused-split-fill = 
-
-# The command to run, usually a shell. If this is not an absolute path, it'll
-# be looked up in the `PATH`. If this is not set, a default will be looked up
-# from your system. The rules for the default lookup are:
-# 
-#   * `SHELL` environment variable
-# 
-#   * `passwd` entry (user information)
-# 
-# This can contain additional arguments to run the command with. If additional
-# arguments are provided, the command will be executed using `/bin/sh -c`.
-# Ghostty does not do any shell command parsing.
-# 
-# This command will be used for all new terminal surfaces, i.e. new windows,
-# tabs, etc. If you want to run a command only for the first terminal surface
-# created when Ghostty starts, use the `initial-command` configuration.
-# 
-# Ghostty supports the common `-e` flag for executing a command with
-# arguments. For example, `ghostty -e fish --with --custom --args`.
-# This flag sets the `initial-command` configuration, see that for more
-# information.
-command = 
-
-# This is the same as "command", but only applies to the first terminal
-# surface created when Ghostty starts. Subsequent terminal surfaces will use
-# the `command` configuration.
-# 
-# After the first terminal surface is created (or closed), there is no
-# way to run this initial command again automatically. As such, setting
-# this at runtime works but will only affect the next terminal surface
-# if it is the first one ever created.
-# 
-# If you're using the `ghostty` CLI there is also a shortcut to set this
-# with arguments directly: you can use the `-e` flag. For example: `ghostty -e
-# fish --with --custom --args`. The `-e` flag automatically forces some
-# other behaviors as well:
-# 
-#   * `gtk-single-instance=false` - This ensures that a new instance is
-#     launched and the CLI args are respected.
-# 
-#   * `quit-after-last-window-closed=true` - This ensures that the Ghostty
-#     process will exit when the command exits. Additionally, the
-#     `quit-after-last-window-closed-delay` is unset.
-# 
-#   * `shell-integration=detect` (if not `none`) - This prevents forcibly
-#     injecting any configured shell integration into the command's
-#     environment. With `-e` its highly unlikely that you're executing a
-#     shell and forced shell integration is likely to cause problems
-#     (i.e. by wrapping your command in a shell, setting env vars, etc.).
-#     This is a safety measure to prevent unexpected behavior. If you want
-#     shell integration with a `-e`-executed command, you must either
-#     name your binary appropriately or source the shell integration script
-#     manually.
-# 
-initial-command = 
-
-# If true, keep the terminal open after the command exits. Normally, the
-# terminal window closes when the running command (such as a shell) exits.
-# With this true, the terminal window will stay open until any keypress is
-# received.
-# 
-# This is primarily useful for scripts or debugging.
-wait-after-command = false
-
-# The number of milliseconds of runtime below which we consider a process exit
-# to be abnormal. This is used to show an error message when the process exits
-# too quickly.
-# 
-# On Linux, this must be paired with a non-zero exit code. On macOS, we allow
-# any exit code because of the way shell processes are launched via the login
-# command.
-abnormal-command-exit-runtime = 250
-
-# The size of the scrollback buffer in bytes. This also includes the active
-# screen. No matter what this is set to, enough memory will always be
-# allocated for the visible screen and anything leftover is the limit for
-# the scrollback.
-# 
-# When this limit is reached, the oldest lines are removed from the
-# scrollback.
-# 
-# Scrollback currently exists completely in memory. This means that the
-# larger this value, the larger potential memory usage. Scrollback is
-# allocated lazily up to this limit, so if you set this to a very large
-# value, it will not immediately consume a lot of memory.
-# 
-# This size is per terminal surface, not for the entire application.
-# 
-# It is not currently possible to set an unlimited scrollback buffer.
-# This is a future planned feature.
-# 
-# This can be changed at runtime but will only affect new terminal surfaces.
-scrollback-limit = 10000000
-
-# Match a regular expression against the terminal text and associate clicking
-# it with an action. This can be used to match URLs, file paths, etc. Actions
-# can be opening using the system opener (i.e. `open` or `xdg-open`) or
-# executing any arbitrary binding action.
-# 
-# Links that are configured earlier take precedence over links that are
-# configured later.
-# 
-# A default link that matches a URL and opens it in the system opener always
-# exists. This can be disabled using `link-url`.
-# 
-# TODO: This can't currently be set!
-
-# Enable URL matching. URLs are matched on hover with control (Linux) or
-# super (macOS) pressed and open using the default system application for
-# the linked URL.
-# 
-# The URL matcher is always lowest priority of any configured links (see
-# `link`). If you want to customize URL matching, use `link` and disable this.
-link-url = true
-
-# Start new windows in fullscreen. This setting applies to new windows and
-# does not apply to tabs, splits, etc. However, this setting will apply to all
-# new windows, not just the first one.
-# 
-# On macOS, this setting does not work if window-decoration is set to
-# "false", because native fullscreen on macOS requires window decorations
-# to be set.
-fullscreen = false
-
-# The title Ghostty will use for the window. This will force the title of the
-# window to be this title at all times and Ghostty will ignore any set title
-# escape sequences programs (such as Neovim) may send.
-# 
-# If you want a blank title, set this to one or more spaces by quoting
-# the value. For example, `title = " "`. This effectively hides the title.
-# This is necessary because setting a blank value resets the title to the
-# default value of the running program.
-# 
-# This configuration can be reloaded at runtime. If it is set, the title
-# will update for all windows. If it is unset, the next title change escape
-# sequence will be honored but previous changes will not retroactively
-# be set. This latter case may require you restart programs such as neovim
-# to get the new title.
-title = 
-
-# The setting that will change the application class value.
-# 
-# This controls the class field of the `WM_CLASS` X11 property (when running
-# under X11), and the Wayland application ID (when running under Wayland).
-# 
-# Note that changing this value between invocations will create new, separate
-# instances, of Ghostty when running with `gtk-single-instance=true`. See that
-# option for more details.
-# 
-# The class name must follow the requirements defined [in the GTK
-# documentation](https://docs.gtk.org/gio/type_func.Application.id_is_valid.html).
-# 
-# The default is `com.mitchellh.ghostty`.
-# 
-# This only affects GTK builds.
-class = ghostty
-
-# This controls the instance name field of the `WM_CLASS` X11 property when
-# running under X11. It has no effect otherwise.
-# 
-# The default is `ghostty`.
-# 
-# This only affects GTK builds.
-x11-instance-name = 
-
-# The directory to change to after starting the command.
-# 
-# This setting is secondary to the `window-inherit-working-directory`
-# setting. If a previous Ghostty terminal exists in the same process,
-# `window-inherit-working-directory` will take precedence. Otherwise, this
-# setting will be used. Typically, this setting is used only for the first
-# window.
-# 
-# The default is `inherit` except in special scenarios listed next. On macOS,
-# if Ghostty can detect it is launched from launchd (double-clicked) or
-# `open`, then it defaults to `home`. On Linux with GTK, if Ghostty can detect
-# it was launched from a desktop launcher, then it defaults to `home`.
-# 
-# The value of this must be an absolute value or one of the special values
-# below:
-# 
-#   * `home` - The home directory of the executing user.
-# 
-#   * `inherit` - The working directory of the launching process.
-working-directory = 
-
-# Key bindings. The format is `trigger=action`. Duplicate triggers will
-# overwrite previously set values. The list of actions is available in
-# the documentation or using the `ghostty +list-actions` command.
-# 
-# Trigger: `+`-separated list of keys and modifiers. Example: `ctrl+a`,
-# `ctrl+shift+b`, `up`. Some notes:
-# 
-#   * modifiers cannot repeat, `ctrl+ctrl+a` is invalid.
-# 
-#   * modifiers and keys can be in any order, `shift+a+ctrl` is *weird*,
-#     but valid.
-# 
-#   * only a single key input is allowed, `ctrl+a+b` is invalid.
-# 
-#   * the key input can be prefixed with `physical:` to specify a
-#     physical key mapping rather than a logical one. A physical key
-#     mapping responds to the hardware keycode and not the keycode
-#     translated by any system keyboard layouts. Example: "ctrl+physical:a"
-# 
-# Valid modifiers are `shift`, `ctrl` (alias: `control`), `alt` (alias: `opt`,
-# `option`), and `super` (alias: `cmd`, `command`). You may use the modifier
-# or the alias. When debugging keybinds, the non-aliased modifier will always
-# be used in output.
-# 
-# Note: The fn or "globe" key on keyboards are not supported as a
-# modifier. This is a limitation of the operating systems and GUI toolkits
-# that Ghostty uses.
-# 
-# You may also specify multiple triggers separated by `>` to require a
-# sequence of triggers to activate the action. For example,
-# `ctrl+a>n=new_window` will only trigger the `new_window` action if the
-# user presses `ctrl+a` followed separately by `n`. In other software, this
-# is sometimes called a leader key, a key chord, a key table, etc. There
-# is no hardcoded limit on the number of parts in a sequence.
-# 
-# Warning: If you define a sequence as a CLI argument to `ghostty`,
-# you probably have to quote the keybind since `>` is a special character
-# in most shells. Example: ghostty --keybind='ctrl+a>n=new_window'
-# 
-# A trigger sequence has some special handling:
-# 
-#   * Ghostty will wait an indefinite amount of time for the next key in
-#     the sequence. There is no way to specify a timeout. The only way to
-#     force the output of a prefix key is to assign another keybind to
-#     specifically output that key (i.e. `ctrl+a>ctrl+a=text:foo`) or
-#     press an unbound key which will send both keys to the program.
-# 
-#   * If a prefix in a sequence is previously bound, the sequence will
-#     override the previous binding. For example, if `ctrl+a` is bound to
-#     `new_window` and `ctrl+a>n` is bound to `new_tab`, pressing `ctrl+a`
-#     will do nothing.
-# 
-#   * Adding to the above, if a previously bound sequence prefix is
-#     used in a new, non-sequence binding, the entire previously bound
-#     sequence will be unbound. For example, if you bind `ctrl+a>n` and
-#     `ctrl+a>t`, and then bind `ctrl+a` directly, both `ctrl+a>n` and
-#     `ctrl+a>t` will become unbound.
-# 
-#   * Trigger sequences are not allowed for `global:` or `all:`-prefixed
-#     triggers. This is a limitation we could remove in the future.
-# 
-# Action is the action to take when the trigger is satisfied. It takes the
-# format `action` or `action:param`. The latter form is only valid if the
-# action requires a parameter.
-# 
-#   * `ignore` - Do nothing, ignore the key input. This can be used to
-#     black hole certain inputs to have no effect.
-# 
-#   * `unbind` - Remove the binding. This makes it so the previous action
-#     is removed, and the key will be sent through to the child command
-#     if it is printable.
-# 
-#   * `csi:text` - Send a CSI sequence. i.e. `csi:A` sends "cursor up".
-# 
-#   * `esc:text` - Send an escape sequence. i.e. `esc:d` deletes to the
-#     end of the word to the right.
-# 
-#   * `text:text` - Send a string. Uses Zig string literal syntax.
-#     i.e. `text:\x15` sends Ctrl-U.
-# 
-#   * All other actions can be found in the documentation or by using the
-#     `ghostty +list-actions` command.
-# 
-# Some notes for the action:
-# 
-#   * The parameter is taken as-is after the `:`. Double quotes or
-#     other mechanisms are included and NOT parsed. If you want to
-#     send a string value that includes spaces, wrap the entire
-#     trigger/action in double quotes. Example: `--keybind="up=csi:A B"`
-# 
-# There are some additional special values that can be specified for
-# keybind:
-# 
-#   * `keybind=clear` will clear all set keybindings. Warning: this
-#     removes ALL keybindings up to this point, including the default
-#     keybindings.
-# 
-# The keybind trigger can be prefixed with some special values to change
-# the behavior of the keybind. These are:
-# 
-#   * `all:` - Make the keybind apply to all terminal surfaces. By default,
-#     keybinds only apply to the focused terminal surface. If this is true,
-#     then the keybind will be sent to all terminal surfaces. This only
-#     applies to actions that are surface-specific. For actions that
-#     are already global (i.e. `quit`), this prefix has no effect.
-# 
-#   * `global:` - Make the keybind global. By default, keybinds only work
-#     within Ghostty and under the right conditions (application focused,
-#     sometimes terminal focused, etc.). If you want a keybind to work
-#     globally across your system (i.e. even when Ghostty is not focused),
-#     specify this prefix. This prefix implies `all:`. Note: this does not
-#     work in all environments; see the additional notes below for more
-#     information.
-# 
-#   * `unconsumed:` - Do not consume the input. By default, a keybind
-#     will consume the input, meaning that the associated encoding (if
-#     any) will not be sent to the running program in the terminal. If
-#     you wish to send the encoded value to the program, specify the
-#     `unconsumed:` prefix before the entire keybind. For example:
-#     `unconsumed:ctrl+a=reload_config`. `global:` and `all:`-prefixed
-#     keybinds will always consume the input regardless of this setting.
-#     Since they are not associated with a specific terminal surface,
-#     they're never encoded.
-# 
-# Keybind triggers are not unique per prefix combination. For example,
-# `ctrl+a` and `global:ctrl+a` are not two separate keybinds. The keybind
-# set later will overwrite the keybind set earlier. In this case, the
-# `global:` keybind will be used.
-# 
-# Multiple prefixes can be specified. For example,
-# `global:unconsumed:ctrl+a=reload_config` will make the keybind global
-# and not consume the input to reload the config.
-# 
-# Note: `global:` is only supported on macOS. On macOS,
-# this feature requires accessibility permissions to be granted to Ghostty.
-# When a `global:` keybind is specified and Ghostty is launched or reloaded,
-# Ghostty will attempt to request these permissions. If the permissions are
-# not granted, the keybind will not work. On macOS, you can find these
-# permissions in System Preferences -> Privacy & Security -> Accessibility.
-# keybind = ctrl+comma=open_config
-keybind = ctrl+alt+up=unbind
-keybind = ctrl+page_down=unbind
-keybind = ctrl+shift+v=paste_from_clipboard
-keybind = shift+insert=paste_from_selection
-keybind = ctrl+shift+a=select_all
-keybind = shift+up=adjust_selection:up
-keybind = alt+five=unbind
-keybind = super+ctrl+right_bracket=unbind
-keybind = ctrl+equal=increase_font_size:1
-keybind = ctrl+shift+o=unbind
-keybind = ctrl+shift+c=copy_to_clipboard
-keybind = ctrl+shift+q=unbind
-keybind = ctrl+shift+n=unbind
-keybind = ctrl+shift+page_down=jump_to_prompt:1
-keybind = ctrl+shift+comma=unbind
-keybind = ctrl+minus=decrease_font_size:1
-keybind = shift+left=adjust_selection:left
-keybind = super+ctrl+shift+up=resize_split:up,10
-keybind = alt+eight=unbind
-keybind = shift+page_up=scroll_page_up
-keybind = ctrl+alt+shift+j=write_scrollback_file:open
-keybind = ctrl+shift+left=unbind
-keybind = ctrl+shift+w=close_surface
-keybind = super+ctrl+shift+equal=equalize_splits
-keybind = shift+end=scroll_to_bottom
-keybind = ctrl+zero=reset_font_size
-keybind = alt+three=unbind
-keybind = ctrl+shift+j=write_scrollback_file:paste
-keybind = ctrl+enter=text:\n
-keybind = shift+enter=text:\n
-keybind = ctrl+page_up=unbind
-keybind = shift+right=adjust_selection:right
-keybind = ctrl+tab=unbind
-keybind = ctrl+alt+left=unbind
-keybind = shift+page_down=scroll_page_down
-keybind = ctrl+shift+right=unbind
-keybind = ctrl+shift+page_up=jump_to_prompt:-1
-keybind = alt+nine=unbind
-keybind = ctrl+shift+t=unbind
-keybind = shift+down=adjust_selection:down
-keybind = super+ctrl+shift+left=resize_split:left,10
-keybind = ctrl+shift+tab=unbind
-keybind = alt+two=unbind
-keybind = ctrl+alt+down=unbind
-keybind = super+ctrl+shift+down=resize_split:down,10
-keybind = super+ctrl+shift+right=resize_split:right,10
-keybind = ctrl+plus=increase_font_size:1
-keybind = alt+four=unbind
-keybind = ctrl+shift+e=new_split:down
-keybind = ctrl+alt+right=unbind
-keybind = alt+f4=unbind
-keybind = alt+one=unbind
-keybind = ctrl+shift+enter=toggle_split_zoom
-keybind = shift+home=scroll_to_top
-keybind = super+ctrl+left_bracket=unbind
-keybind = ctrl+shift+i=inspector:toggle
-keybind = alt+six=unbind
-keybind = alt+seven=unbind
-
-# Horizontal window padding. This applies padding between the terminal cells
-# and the left and right window borders. The value is in points, meaning that
-# it will be scaled appropriately for screen DPI.
-# 
-# If this value is set too large, the screen will render nothing, because the
-# grid will be completely squished by the padding. It is up to you as the user
-# to pick a reasonable value. If you pick an unreasonable value, a warning
-# will appear in the logs.
-# 
-# Changing this configuration at runtime will only affect new terminals, i.e.
-# new windows, tabs, etc.
-# 
-# To set a different left and right padding, specify two numerical values
-# separated by a comma. For example, `window-padding-x = 2,4` will set the
-# left padding to 2 and the right padding to 4. If you want to set both
-# paddings to the same value, you can use a single value. For example,
-# `window-padding-x = 2` will set both paddings to 2.
-window-padding-x = 0
-
-# Vertical window padding. This applies padding between the terminal cells and
-# the top and bottom window borders. The value is in points, meaning that it
-# will be scaled appropriately for screen DPI.
-# 
-# If this value is set too large, the screen will render nothing, because the
-# grid will be completely squished by the padding. It is up to you as the user
-# to pick a reasonable value. If you pick an unreasonable value, a warning
-# will appear in the logs.
-# 
-# Changing this configuration at runtime will only affect new terminals,
-# i.e. new windows, tabs, etc.
-# 
-# To set a different top and bottom padding, specify two numerical values
-# separated by a comma. For example, `window-padding-y = 2,4` will set the
-# top padding to 2 and the bottom padding to 4. If you want to set both
-# paddings to the same value, you can use a single value. For example,
-# `window-padding-y = 2` will set both paddings to 2.
-window-padding-y = 0
-
-# The viewport dimensions are usually not perfectly divisible by the cell
-# size. In this case, some extra padding on the end of a column and the bottom
-# of the final row may exist. If this is `true`, then this extra padding
-# is automatically balanced between all four edges to minimize imbalance on
-# one side. If this is `false`, the top left grid cell will always hug the
-# edge with zero padding other than what may be specified with the other
-# `window-padding` options.
-# 
-# If other `window-padding` fields are set and this is `true`, this will still
-# apply. The other padding is applied first and may affect how many grid cells
-# actually exist, and this is applied last in order to balance the padding
-# given a certain viewport size and grid cell size.
-window-padding-balance = false
-
-# The color of the padding area of the window. Valid values are:
-# 
-# * `background` - The background color specified in `background`.
-# * `extend` - Extend the background color of the nearest grid cell.
-# * `extend-always` - Same as "extend" but always extends without applying
-#   any of the heuristics that disable extending noted below.
-# 
-# The "extend" value will be disabled in certain scenarios. On primary
-# screen applications (i.e. not something like Neovim), the color will not
-# be extended vertically if any of the following are true:
-# 
-# * The nearest row has any cells that have the default background color.
-#   The thinking is that in this case, the default background color looks
-#   fine as a padding color.
-# * The nearest row is a prompt row (requires shell integration). The
-#   thinking here is that prompts often contain powerline glyphs that
-#   do not look good extended.
-# * The nearest row contains a perfect fit powerline character. These
-#   don't look good extended.
-# 
-window-padding-color = background
-
-# Synchronize rendering with the screen refresh rate. If true, this will
-# minimize tearing and align redraws with the screen but may cause input
-# latency. If false, this will maximize redraw frequency but may cause tearing,
-# and under heavy load may use more CPU and power.
-# 
-# This defaults to true because out-of-sync rendering on macOS can
-# cause kernel panics (macOS 14.4+) and performance issues for external
-# displays over some hardware such as DisplayLink. If you want to minimize
-# input latency, set this to false with the known aforementioned risks.
-# 
-# Changing this value at runtime will only affect new terminals.
-# 
-# This setting is only supported currently on macOS.
-window-vsync = false
-
-# If true, new windows and tabs will inherit the working directory of the
-# previously focused window. If no window was previously focused, the default
-# working directory will be used (the `working-directory` option).
-window-inherit-working-directory = true
-
-# If true, new windows and tabs will inherit the font size of the previously
-# focused window. If no window was previously focused, the default font size
-# will be used. If this is false, the default font size specified in the
-# configuration `font-size` will be used.
-window-inherit-font-size = true
-
-# Valid values:
-# 
-#   * `true`
-#   * `false` - windows won't have native decorations, i.e. titlebar and
-#      borders. On macOS this also disables tabs and tab overview.
-# 
-# The "toggle_window_decorations" keybind action can be used to create
-# a keybinding to toggle this setting at runtime.
-# 
-# Changing this configuration in your configuration and reloading will
-# only affect new windows. Existing windows will not be affected.
-# 
-# macOS: To hide the titlebar without removing the native window borders
-#        or rounded corners, use `macos-titlebar-style = hidden` instead.
-window-decoration = false
-
-# The font that will be used for the application's window and tab titles.
-# 
-# This is currently only supported on macOS.
-window-title-font-family = 
-
-# The theme to use for the windows. Valid values:
-# 
-#   * `auto` - Determine the theme based on the configured terminal
-#      background color. This has no effect if the "theme" configuration
-#      has separate light and dark themes. In that case, the behavior
-#      of "auto" is equivalent to "system".
-#   * `system` - Use the system theme.
-#   * `light` - Use the light theme regardless of system theme.
-#   * `dark` - Use the dark theme regardless of system theme.
-#   * `ghostty` - Use the background and foreground colors specified in the
-#     Ghostty configuration. This is only supported on Linux builds with
-#     Adwaita and `gtk-adwaita` enabled.
-# 
-# On macOS, if `macos-titlebar-style` is "tabs", the window theme will be
-# automatically set based on the luminosity of the terminal background color.
-# This only applies to terminal windows. This setting will still apply to
-# non-terminal windows within Ghostty.
-# 
-# This is currently only supported on macOS and Linux.
-window-theme = auto
-
-# The colorspace to use for the terminal window. The default is `srgb` but
-# this can also be set to `display-p3` to use the Display P3 colorspace.
-# 
-# Changing this value at runtime will only affect new windows.
-# 
-# This setting is only supported on macOS.
-window-colorspace = display-p3
-
-# The initial window size. This size is in terminal grid cells by default.
-# Both values must be set to take effect. If only one value is set, it is
-# ignored.
-# 
-# We don't currently support specifying a size in pixels but a future change
-# can enable that. If this isn't specified, the app runtime will determine
-# some default size.
-# 
-# Note that the window manager may put limits on the size or override the
-# size. For example, a tiling window manager may force the window to be a
-# certain size to fit within the grid. There is nothing Ghostty will do about
-# this, but it will make an effort.
-# 
-# Sizes larger than the screen size will be clamped to the screen size.
-# This can be used to create a maximized-by-default window size.
-# 
-# This will not affect new tabs, splits, or other nested terminal elements.
-# This only affects the initial window size of any new window. Changing this
-# value will not affect the size of the window after it has been created. This
-# is only used for the initial size.
-# 
-# BUG: On Linux with GTK, the calculated window size will not properly take
-# into account window decorations. As a result, the grid dimensions will not
-# exactly match this configuration. If window decorations are disabled (see
-# window-decorations), then this will work as expected.
-# 
-# Windows smaller than 10 wide by 4 high are not allowed.
-window-height = 0
-
-window-width = 0
-# Whether to enable saving and restoring window state. Window state includes
-# their position, size, tabs, splits, etc. Some window state requires shell
-# integration, such as preserving working directories. See `shell-integration`
-# for more information.
-# 
-# There are three valid values for this configuration:
-# 
-#   * `default` will use the default system behavior. On macOS, this
-#     will only save state if the application is forcibly terminated
-#     or if it is configured systemwide via Settings.app.
-# 
-#   * `never` will never save window state.
-# 
-#   * `always` will always save window state whenever Ghostty is exited.
-# 
-# If you change this value to `never` while Ghostty is not running, the next
-# Ghostty launch will NOT restore the window state.
-# 
-# If you change this value to `default` while Ghostty is not running and the
-# previous exit saved state, the next Ghostty launch will still restore the
-# window state. This is because Ghostty cannot know if the previous exit was
-# due to a forced save or not (macOS doesn't provide this information).
-# 
-# If you change this value so that window state is saved while Ghostty is not
-# running, the previous window state will not be restored because Ghostty only
-# saves state on exit if this is enabled.
-# 
-# The default value is `default`.
-# 
-# This is currently only supported on macOS. This has no effect on Linux.
-window-save-state = default
-
-# Resize the window in discrete increments of the focused surface's cell size.
-# If this is disabled, surfaces are resized in pixel increments. Currently
-# only supported on macOS.
-window-step-resize = false
-
-# The position where new tabs are created. Valid values:
-# 
-#   * `current` - Insert the new tab after the currently focused tab,
-#     or at the end if there are no focused tabs.
-# 
-#   * `end` - Insert the new tab at the end of the tab list.
-window-new-tab-position = current
-
-# This controls when resize overlays are shown. Resize overlays are a
-# transient popup that shows the size of the terminal while the surfaces are
-# being resized. The possible options are:
-# 
-#   * `always` - Always show resize overlays.
-#   * `never` - Never show resize overlays.
-#   * `after-first` - The resize overlay will not appear when the surface
-#                     is first created, but will show up if the surface is
-#                     subsequently resized.
-# 
-# The default is `after-first`.
-resize-overlay = never
-
-# If resize overlays are enabled, this controls the position of the overlay.
-# The possible options are:
-# 
-#   * `center`
-#   * `top-left`
-#   * `top-center`
-#   * `top-right`
-#   * `bottom-left`
-#   * `bottom-center`
-#   * `bottom-right`
-# 
-# The default is `center`.
-resize-overlay-position = center
-
-# If resize overlays are enabled, this controls how long the overlay is
-# visible on the screen before it is hidden. The default is ¾ of a second or
-# 750 ms.
-# 
-# The duration is specified as a series of numbers followed by time units.
-# Whitespace is allowed between numbers and units. Each number and unit will
-# be added together to form the total duration.
-# 
-# The allowed time units are as follows:
-# 
-#   * `y` - 365 SI days, or 8760 hours, or 31536000 seconds. No adjustments
-#     are made for leap years or leap seconds.
-#   * `d` - one SI day, or 86400 seconds.
-#   * `h` - one hour, or 3600 seconds.
-#   * `m` - one minute, or 60 seconds.
-#   * `s` - one second.
-#   * `ms` - one millisecond, or 0.001 second.
-#   * `us` or `µs` - one microsecond, or 0.000001 second.
-#   * `ns` - one nanosecond, or 0.000000001 second.
-# 
-# Examples:
-#   * `1h30m`
-#   * `45s`
-# 
-# Units can be repeated and will be added together. This means that
-# `1h1h` is equivalent to `2h`. This is confusing and should be avoided.
-# A future update may disallow this.
-# 
-# The maximum value is `584y 49w 23h 34m 33s 709ms 551µs 615ns`. Any
-# value larger than this will be clamped to the maximum value.
-resize-overlay-duration = 750ms
-
-# If true, when there are multiple split panes, the mouse selects the pane
-# that is focused. This only applies to the currently focused window; i.e.
-# mousing over a split in an unfocused window will now focus that split
-# and bring the window to front.
-# 
-# Default is false.
-focus-follows-mouse = false
-
-# Whether to allow programs running in the terminal to read/write to the
-# system clipboard (OSC 52, for googling). The default is to allow clipboard
-# reading after prompting the user and allow writing unconditionally.
-# 
-# Valid values are:
-# 
-#   * `ask`
-#   * `allow`
-#   * `deny`
-# 
-clipboard-read = ask
-
-clipboard-write = allow
-# Trims trailing whitespace on data that is copied to the clipboard. This does
-# not affect data sent to the clipboard via `clipboard-write`.
-clipboard-trim-trailing-spaces = true
-
-# Require confirmation before pasting text that appears unsafe. This helps
-# prevent a "copy/paste attack" where a user may accidentally execute unsafe
-# commands by pasting text with newlines.
-clipboard-paste-protection = true
-
-# If true, bracketed pastes will be considered safe. By default, bracketed
-# pastes are considered safe. "Bracketed" pastes are pastes while the running
-# program has bracketed paste mode enabled (a setting set by the running
-# program, not the terminal emulator).
-clipboard-paste-bracketed-safe = true
-
-# The total amount of bytes that can be used for image data (i.e. the Kitty
-# image protocol) per terminal screen. The maximum value is 4,294,967,295
-# (4GiB). The default is 320MB. If this is set to zero, then all image
-# protocols will be disabled.
-# 
-# This value is separate for primary and alternate screens so the effective
-# limit per surface is double.
-image-storage-limit = 4294967295
-
-# Whether to automatically copy selected text to the clipboard. `true`
-# will prefer to copy to the selection clipboard if supported by the
-# OS, otherwise it will copy to the system clipboard.
-# 
-# The value `clipboard` will always copy text to the selection clipboard
-# (for supported systems) as well as the system clipboard. This is sometimes
-# a preferred behavior on Linux.
-# 
-# Middle-click paste will always use the selection clipboard on Linux
-# and the system clipboard on macOS. Middle-click paste is always enabled
-# even if this is `false`.
-# 
-# The default value is true on Linux and false on macOS. macOS copy on
-# select behavior is not typical for applications so it is disabled by
-# default. On Linux, this is a standard behavior so it is enabled by
-# default.
-copy-on-select = true
-
-# The time in milliseconds between clicks to consider a click a repeat
-# (double, triple, etc.) or an entirely new single click. A value of zero will
-# use a platform-specific default. The default on macOS is determined by the
-# OS settings. On every other platform it is 500ms.
-click-repeat-interval = 0
-
-# Additional configuration files to read. This configuration can be repeated
-# to read multiple configuration files. Configuration files themselves can
-# load more configuration files. Paths are relative to the file containing the
-# `config-file` directive. For command-line arguments, paths are relative to
-# the current working directory.
-# 
-# Prepend a ? character to the file path to suppress errors if the file does
-# not exist. If you want to include a file that begins with a literal ?
-# character, surround the file path in double quotes (").
-# 
-# Cycles are not allowed. If a cycle is detected, an error will be logged and
-# the configuration file will be ignored.
-# 
-# Configuration files are loaded after the configuration they're defined
-# within in the order they're defined. **THIS IS A VERY SUBTLE BUT IMPORTANT
-# POINT.** To put it another way: configuration files do not take effect
-# until after the entire configuration is loaded. For example, in the
-# configuration below:
-# 
-# ```
-# config-file = "foo"
-# a = 1
-# ```
-# 
-# If "foo" contains `a = 2`, the final value of `a` will be 2, because
-# `foo` is loaded after the configuration file that configures the
-# nested `config-file` value.
-config-file = 
-
-# When this is true, the default configuration file paths will be loaded.
-# The default configuration file paths are currently only the XDG
-# config path ($XDG_CONFIG_HOME/ghostty/config).
-# 
-# If this is false, the default configuration paths will not be loaded.
-# This is targeted directly at using Ghostty from the CLI in a way
-# that minimizes external effects.
-# 
-# This is a CLI-only configuration. Setting this in a configuration file
-# will have no effect. It is not an error, but it will not do anything.
-# This configuration can only be set via CLI arguments.
-config-default-files = true
-
-# Confirms that a surface should be closed before closing it. This defaults to
-# true. If set to false, surfaces will close without any confirmation.
-confirm-close-surface = false
-
-# Whether or not to quit after the last surface is closed.
-# 
-# This defaults to `false` on macOS since that is standard behavior for
-# a macOS application. On Linux, this defaults to `true` since that is
-# generally expected behavior.
-# 
-# On Linux, if this is `true`, Ghostty can delay quitting fully until a
-# configurable amount of time has passed after the last window is closed.
-# See the documentation of `quit-after-last-window-closed-delay`.
-quit-after-last-window-closed = true
-
-# Controls how long Ghostty will stay running after the last open surface has
-# been closed. This only has an effect if `quit-after-last-window-closed` is
-# also set to `true`.
-# 
-# The minimum value for this configuration is `1s`. Any values lower than
-# this will be clamped to `1s`.
-# 
-# The duration is specified as a series of numbers followed by time units.
-# Whitespace is allowed between numbers and units. Each number and unit will
-# be added together to form the total duration.
-# 
-# The allowed time units are as follows:
-# 
-#   * `y` - 365 SI days, or 8760 hours, or 31536000 seconds. No adjustments
-#     are made for leap years or leap seconds.
-#   * `d` - one SI day, or 86400 seconds.
-#   * `h` - one hour, or 3600 seconds.
-#   * `m` - one minute, or 60 seconds.
-#   * `s` - one second.
-#   * `ms` - one millisecond, or 0.001 second.
-#   * `us` or `µs` - one microsecond, or 0.000001 second.
-#   * `ns` - one nanosecond, or 0.000000001 second.
-# 
-# Examples:
-#   * `1h30m`
-#   * `45s`
-# 
-# Units can be repeated and will be added together. This means that
-# `1h1h` is equivalent to `2h`. This is confusing and should be avoided.
-# A future update may disallow this.
-# 
-# The maximum value is `584y 49w 23h 34m 33s 709ms 551µs 615ns`. Any
-# value larger than this will be clamped to the maximum value.
-# 
-# By default `quit-after-last-window-closed-delay` is unset and
-# Ghostty will quit immediately after the last window is closed if
-# `quit-after-last-window-closed` is `true`.
-# 
-# Only implemented on Linux.
-quit-after-last-window-closed-delay = 
-
-# This controls whether an initial window is created when Ghostty
-# is run. Note that if `quit-after-last-window-closed` is `true` and
-# `quit-after-last-window-closed-delay` is set, setting `initial-window` to
-# `false` will mean that Ghostty will quit after the configured delay if no
-# window is ever created. Only implemented on Linux and macOS.
-initial-window = true
-
-# The position of the "quick" terminal window. To learn more about the
-# quick terminal, see the documentation for the `toggle_quick_terminal`
-# binding action.
-# 
-# Valid values are:
-# 
-#   * `top` - Terminal appears at the top of the screen.
-#   * `bottom` - Terminal appears at the bottom of the screen.
-#   * `left` - Terminal appears at the left of the screen.
-#   * `right` - Terminal appears at the right of the screen.
-#   * `center` - Terminal appears at the center of the screen.
-# 
-# Changing this configuration requires restarting Ghostty completely.
-quick-terminal-position = top
-
-# The screen where the quick terminal should show up.
-# 
-# Valid values are:
-# 
-#  * `main` - The screen that the operating system recommends as the main
-#    screen. On macOS, this is the screen that is currently receiving
-#    keyboard input. This screen is defined by the operating system and
-#    not chosen by Ghostty.
-# 
-#  * `mouse` - The screen that the mouse is currently hovered over.
-# 
-#  * `macos-menu-bar` - The screen that contains the macOS menu bar as
-#    set in the display settings on macOS. This is a bit confusing because
-#    every screen on macOS has a menu bar, but this is the screen that
-#    contains the primary menu bar.
-# 
-# The default value is `main` because this is the recommended screen
-# by the operating system.
-quick-terminal-screen = main
-
-# Duration (in seconds) of the quick terminal enter and exit animation.
-# Set it to 0 to disable animation completely. This can be changed at
-# runtime.
-quick-terminal-animation-duration = 0.2
-
-# Automatically hide the quick terminal when focus shifts to another window.
-# Set it to false for the quick terminal to remain open even when it loses focus.
-quick-terminal-autohide = true
-
-# Whether to enable shell integration auto-injection or not. Shell integration
-# greatly enhances the terminal experience by enabling a number of features:
-# 
-#   * Working directory reporting so new tabs, splits inherit the
-#     previous terminal's working directory.
-# 
-#   * Prompt marking that enables the "jump_to_prompt" keybinding.
-# 
-#   * If you're sitting at a prompt, closing a terminal will not ask
-#     for confirmation.
-# 
-#   * Resizing the window with a complex prompt usually paints much
-#     better.
-# 
-# Allowable values are:
-# 
-#   * `none` - Do not do any automatic injection. You can still manually
-#     configure your shell to enable the integration.
-# 
-#   * `detect` - Detect the shell based on the filename.
-# 
-#   * `bash`, `elvish`, `fish`, `zsh` - Use this specific shell injection scheme.
-# 
-# The default value is `detect`.
-shell-integration = zsh
-
-# Shell integration features to enable if shell integration itself is enabled.
-# The format of this is a list of features to enable separated by commas. If
-# you prefix a feature with `no-` then it is disabled. If you omit a feature,
-# its default value is used, so you must explicitly disable features you don't
-# want. You can also use `true` or `false` to turn all features on or off.
-# 
-# Available features:
-# 
-#   * `cursor` - Set the cursor to a blinking bar at the prompt.
-# 
-#   * `sudo` - Set sudo wrapper to preserve terminfo.
-# 
-#   * `title` - Set the window title via shell integration.
-# 
-# Example: `cursor`, `no-cursor`, `sudo`, `no-sudo`, `title`, `no-title`
-shell-integration-features = cursor,sudo,title
-
-# Sets the reporting format for OSC sequences that request color information.
-# Ghostty currently supports OSC 10 (foreground), OSC 11 (background), and
-# OSC 4 (256 color palette) queries, and by default the reported values
-# are scaled-up RGB values, where each component are 16 bits. This is how
-# most terminals report these values. However, some legacy applications may
-# require 8-bit, unscaled, components. We also support turning off reporting
-# altogether. The components are lowercase hex values.
-# 
-# Allowable values are:
-# 
-#   * `none` - OSC 4/10/11 queries receive no reply
-# 
-#   * `8-bit` - Color components are return unscaled, i.e. `rr/gg/bb`
-# 
-#   * `16-bit` - Color components are returned scaled, e.g. `rrrr/gggg/bbbb`
-# 
-# The default value is `16-bit`.
-osc-color-report-format = 16-bit
-
-# If true, allows the "KAM" mode (ANSI mode 2) to be used within
-# the terminal. KAM disables keyboard input at the request of the
-# application. This is not a common feature and is not recommended
-# to be enabled. This will not be documented further because
-# if you know you need KAM, you know. If you don't know if you
-# need KAM, you don't need it.
-vt-kam-allowed = false
-
-# Custom shaders to run after the default shaders. This is a file path
-# to a GLSL-syntax shader for all platforms.
-# 
-# Warning: Invalid shaders can cause Ghostty to become unusable such as by
-# causing the window to be completely black. If this happens, you can
-# unset this configuration to disable the shader.
-# 
-# On Linux, this requires OpenGL 4.2. Ghostty typically only requires
-# OpenGL 3.3, but custom shaders push that requirement up to 4.2.
-# 
-# The shader API is identical to the Shadertoy API: you specify a `mainImage`
-# function and the available uniforms match Shadertoy. The iChannel0 uniform
-# is a texture containing the rendered terminal screen.
-# 
-# If the shader fails to compile, the shader will be ignored. Any errors
-# related to shader compilation will not show up as configuration errors
-# and only show up in the log, since shader compilation happens after
-# configuration loading on the dedicated render thread.  For interactive
-# development, use [shadertoy.com](https://shadertoy.com).
-# 
-# This can be repeated multiple times to load multiple shaders. The shaders
-# will be run in the order they are specified.
-# 
-# Changing this value at runtime and reloading the configuration will only
-# affect new windows, tabs, and splits.
-custom-shader = 
-
-# If `true` (default), the focused terminal surface will run an animation
-# loop when custom shaders are used. This uses slightly more CPU (generally
-# less than 10%) but allows the shader to animate. This only runs if there
-# are custom shaders and the terminal is focused.
-# 
-# If this is set to `false`, the terminal and custom shader will only render
-# when the terminal is updated. This is more efficient but the shader will
-# not animate.
-# 
-# This can also be set to `always`, which will always run the animation
-# loop regardless of whether the terminal is focused or not. The animation
-# loop will still only run when custom shaders are used. Note that this
-# will use more CPU per terminal surface and can become quite expensive
-# depending on the shader and your terminal usage.
-# 
-# This value can be changed at runtime and will affect all currently
-# open terminals.
-custom-shader-animation = true
-
-# If anything other than false, fullscreen mode on macOS will not use the
-# native fullscreen, but make the window fullscreen without animations and
-# using a new space. It's faster than the native fullscreen mode since it
-# doesn't use animations.
-# 
-# Important: tabs DO NOT WORK in this mode. Non-native fullscreen removes
-# the titlebar and macOS native tabs require the titlebar. If you use tabs,
-# you should not use this mode.
-# 
-# If you fullscreen a window with tabs, the currently focused tab will
-# become fullscreen while the others will remain in a separate window in
-# the background. You can switch to that window using normal window-switching
-# keybindings such as command+tilde. When you exit fullscreen, the window
-# will return to the tabbed state it was in before.
-# 
-# Allowable values are:
-# 
-#   * `visible-menu` - Use non-native macOS fullscreen, keep the menu bar visible
-#   * `true` - Use non-native macOS fullscreen, hide the menu bar
-#   * `false` - Use native macOS fullscreen
-# 
-# Changing this option at runtime works, but will only apply to the next
-# time the window is made fullscreen. If a window is already fullscreen,
-# it will retain the previous setting until fullscreen is exited.
-macos-non-native-fullscreen = false
-
-# The style of the macOS titlebar. Available values are: "native",
-# "transparent", "tabs", and "hidden".
-# 
-# The "native" style uses the native macOS titlebar with zero customization.
-# The titlebar will match your window theme (see `window-theme`).
-# 
-# The "transparent" style is the same as "native" but the titlebar will
-# be transparent and allow your window background color to come through.
-# This makes a more seamless window appearance but looks a little less
-# typical for a macOS application and may not work well with all themes.
-# 
-# The "transparent" style will also update in real-time to dynamic
-# changes to the window background color, i.e. via OSC 11. To make this
-# more aesthetically pleasing, this only happens if the terminal is
-# a window, tab, or split that borders the top of the window. This
-# avoids a disjointed appearance where the titlebar color changes
-# but all the topmost terminals don't match.
-# 
-# The "tabs" style is a completely custom titlebar that integrates the
-# tab bar into the titlebar. This titlebar always matches the background
-# color of the terminal. There are some limitations to this style:
-# On macOS 13 and below, saved window state will not restore tabs correctly.
-# macOS 14 does not have this issue and any other macOS version has not
-# been tested.
-# 
-# The "hidden" style hides the titlebar. Unlike `window-decoration = false`,
-# however, it does not remove the frame from the window or cause it to have
-# squared corners. Changing to or from this option at run-time may affect
-# existing windows in buggy ways. The top titlebar area of the window will
-# continue to drag the window around and you will not be able to use
-# the mouse for terminal events in this space.
-# 
-# The default value is "transparent". This is an opinionated choice
-# but its one I think is the most aesthetically pleasing and works in
-# most cases.
-# 
-# Changing this option at runtime only applies to new windows.
-macos-titlebar-style = transparent
-
-# Whether the proxy icon in the macOS titlebar is visible. The proxy icon
-# is the icon that represents the folder of the current working directory.
-# You can see this very clearly in the macOS built-in Terminal.app
-# titlebar.
-# 
-# The proxy icon is only visible with the native macOS titlebar style.
-# 
-# Valid values are:
-# 
-#   * `visible` - Show the proxy icon.
-#   * `hidden` - Hide the proxy icon.
-# 
-# The default value is `visible`.
-# 
-# This setting can be changed at runtime and will affect all currently
-# open windows but only after their working directory changes again.
-# Therefore, to make this work after changing the setting, you must
-# usually `cd` to a different directory, open a different file in an
-# editor, etc.
-macos-titlebar-proxy-icon = hidden
-
-# macOS doesn't have a distinct "alt" key and instead has the "option"
-# key which behaves slightly differently. On macOS by default, the
-# option key plus a character will sometimes produces a Unicode character.
-# For example, on US standard layouts option-b produces "∫". This may be
-# undesirable if you want to use "option" as an "alt" key for keybindings
-# in terminal programs or shells.
-# 
-# This configuration lets you change the behavior so that option is treated
-# as alt.
-# 
-# The default behavior (unset) will depend on your active keyboard
-# layout. If your keyboard layout is one of the keyboard layouts listed
-# below, then the default value is "true". Otherwise, the default
-# value is "false". Keyboard layouts with a default value of "true" are:
-# 
-#   - U.S. Standard
-#   - U.S. International
-# 
-# Note that if an *Option*-sequence doesn't produce a printable character, it
-# will be treated as *Alt* regardless of this setting. (i.e. `alt+ctrl+a`).
-# 
-# Explicit values that can be set:
-# 
-# If `true`, the *Option* key will be treated as *Alt*. This makes terminal
-# sequences expecting *Alt* to work properly, but will break Unicode input
-# sequences on macOS if you use them via the *Alt* key.
-# 
-# You may set this to `false` to restore the macOS *Alt* key unicode
-# sequences but this will break terminal sequences expecting *Alt* to work.
-# 
-# The values `left` or `right` enable this for the left or right *Option*
-# key, respectively.
-# 
-# This does not work with GLFW builds.
-macos-option-as-alt = 
-
-# Whether to enable the macOS window shadow. The default value is true.
-# With some window managers and window transparency settings, you may
-# find false more visually appealing.
-macos-window-shadow = true
-
-# If true, Ghostty on macOS will automatically enable the "Secure Input"
-# feature when it detects that a password prompt is being displayed.
-# 
-# "Secure Input" is a macOS security feature that prevents applications from
-# reading keyboard events. This can always be enabled manually using the
-# `Ghostty > Secure Keyboard Entry` menu item.
-# 
-# Note that automatic password prompt detection is based on heuristics
-# and may not always work as expected. Specifically, it does not work
-# over SSH connections, but there may be other cases where it also
-# doesn't work.
-# 
-# A reason to disable this feature is if you find that it is interfering
-# with legitimate accessibility software (or software that uses the
-# accessibility APIs), since secure input prevents any application from
-# reading keyboard events.
-macos-auto-secure-input = true
-
-# If true, Ghostty will show a graphical indication when secure input is
-# enabled. This indication is generally recommended to know when secure input
-# is enabled.
-# 
-# Normally, secure input is only active when a password prompt is displayed
-# or it is manually (and typically temporarily) enabled. However, if you
-# always have secure input enabled, the indication can be distracting and
-# you may want to disable it.
-macos-secure-input-indication = true
-
-# Customize the macOS app icon.
-# 
-# This only affects the icon that appears in the dock, application
-# switcher, etc. This does not affect the icon in Finder because
-# that is controlled by a hardcoded value in the signed application
-# bundle and can't be changed at runtime. For more details on what
-# exactly is affected, see the `NSApplication.icon` Apple documentation;
-# that is the API that is being used to set the icon.
-# 
-# Valid values:
-# 
-#  * `official` - Use the official Ghostty icon.
-#  * `custom-style` - Use the official Ghostty icon but with custom
-#    styles applied to various layers. The custom styles must be
-#    specified using the additional `macos-icon`-prefixed configurations.
-#    The `macos-icon-ghost-color` and `macos-icon-screen-color`
-#    configurations are required for this style.
-# 
-# WARNING: The `custom-style` option is _experimental_. We may change
-# the format of the custom styles in the future. We're still finalizing
-# the exact layers and customization options that will be available.
-# 
-# Other caveats:
-# 
-#   * The icon in the update dialog will always be the official icon.
-#     This is because the update dialog is managed through a
-#     separate framework and cannot be customized without significant
-#     effort.
-# 
-macos-icon = official
-
-# The material to use for the frame of the macOS app icon.
-# 
-# Valid values:
-# 
-#  * `aluminum` - A brushed aluminum frame. This is the default.
-#  * `beige` - A classic 90's computer beige frame.
-#  * `plastic` - A glossy, dark plastic frame.
-#  * `chrome` - A shiny chrome frame.
-# 
-# This only has an effect when `macos-icon` is set to `custom-style`.
-macos-icon-frame = aluminum
-
-# The color of the ghost in the macOS app icon.
-# 
-# The format of the color is the same as the `background` configuration;
-# see that for more information.
-# 
-# Note: This configuration is required when `macos-icon` is set to
-# `custom-style`.
-# 
-# This only has an effect when `macos-icon` is set to `custom-style`.
-macos-icon-ghost-color = 
-
-# The color of the screen in the macOS app icon.
-# 
-# The screen is a gradient so you can specify multiple colors that
-# make up the gradient. Colors should be separated by commas. The
-# format of the color is the same as the `background` configuration;
-# see that for more information.
-# 
-# Note: This configuration is required when `macos-icon` is set to
-# `custom-style`.
-# 
-# This only has an effect when `macos-icon` is set to `custom-style`.
-macos-icon-screen-color = 
-
-# Put every surface (tab, split, window) into a dedicated Linux cgroup.
-# 
-# This makes it so that resource management can be done on a per-surface
-# granularity. For example, if a shell program is using too much memory,
-# only that shell will be killed by the oom monitor instead of the entire
-# Ghostty process. Similarly, if a shell program is using too much CPU,
-# only that surface will be CPU-throttled.
-# 
-# This will cause startup times to be slower (a hundred milliseconds or so),
-# so the default value is "single-instance." In single-instance mode, only
-# one instance of Ghostty is running (see gtk-single-instance) so the startup
-# time is a one-time cost. Additionally, single instance Ghostty is much
-# more likely to have many windows, tabs, etc. so cgroup isolation is a
-# big benefit.
-# 
-# This feature requires systemd. If systemd is unavailable, cgroup
-# initialization will fail. By default, this will not prevent Ghostty
-# from working (see linux-cgroup-hard-fail).
-# 
-# Valid values are:
-# 
-#   * `never` - Never use cgroups.
-#   * `always` - Always use cgroups.
-#   * `single-instance` - Enable cgroups only for Ghostty instances launched
-#     as single-instance applications (see gtk-single-instance).
-# 
-linux-cgroup = single-instance
-
-# Memory limit for any individual terminal process (tab, split, window,
-# etc.) in bytes. If this is unset then no memory limit will be set.
-# 
-# Note that this sets the "memory.high" configuration for the memory
-# controller, which is a soft limit. You should configure something like
-# systemd-oom to handle killing processes that have too much memory
-# pressure.
-linux-cgroup-memory-limit = 
-
-# Number of processes limit for any individual terminal process (tab, split,
-# window, etc.). If this is unset then no limit will be set.
-# 
-# Note that this sets the "pids.max" configuration for the process number
-# controller, which is a hard limit.
-linux-cgroup-processes-limit = 
-
-# If this is false, then any cgroup initialization (for linux-cgroup)
-# will be allowed to fail and the failure is ignored. This is useful if
-# you view cgroup isolation as a "nice to have" and not a critical resource
-# management feature, because Ghostty startup will not fail if cgroup APIs
-# fail.
-# 
-# If this is true, then any cgroup initialization failure will cause
-# Ghostty to exit or new surfaces to not be created.
-# 
-# Note: This currently only affects cgroup initialization. Subprocesses
-# must always be able to move themselves into an isolated cgroup.
-linux-cgroup-hard-fail = false
-
-# If `true`, the Ghostty GTK application will run in single-instance mode:
-# each new `ghostty` process launched will result in a new window if there is
-# already a running process.
-# 
-# If `false`, each new ghostty process will launch a separate application.
-# 
-# The default value is `detect` which will default to `true` if Ghostty
-# detects that it was launched from the `.desktop` file such as an app
-# launcher (like Gnome Shell)  or by D-Bus activation. If Ghostty is launched
-# from the command line, it will default to `false`.
-# 
-# Note that debug builds of Ghostty have a separate single-instance ID
-# so you can test single instance without conflicting with release builds.
-gtk-single-instance = desktop
-
-# When enabled, the full GTK titlebar is displayed instead of your window
-# manager's simple titlebar. The behavior of this option will vary with your
-# window manager.
-# 
-# This option does nothing when `window-decoration` is false or when running
-# under macOS.
-# 
-# Changing this value at runtime and reloading the configuration will only
-# affect new windows.
-gtk-titlebar = false
-
-# Determines the side of the screen that the GTK tab bar will stick to.
-# Top, bottom, left, right, and hidden are supported. The default is top.
-# 
-# If this option has value `left` or `right` when using Adwaita, it falls
-# back to `top`. `hidden`, meaning that tabs don't exist, is not supported
-# without using Adwaita, falling back to `top`.
-# 
-# When `hidden` is set and Adwaita is enabled, a tab button displaying the
-# number of tabs will appear in the title bar. It has the ability to open a
-# tab overview for displaying tabs. Alternatively, you can use the
-# `toggle_tab_overview` action in a keybind if your window doesn't have a
-# title bar, or you can switch tabs with keybinds.
-gtk-tabs-location = top
-
-# Determines the appearance of the top and bottom bars when using the
-# Adwaita tab bar. This requires `gtk-adwaita` to be enabled (it is
-# by default).
-# 
-# Valid values are:
-# 
-#  * `flat` - Top and bottom bars are flat with the terminal window.
-#  * `raised` - Top and bottom bars cast a shadow on the terminal area.
-#  * `raised-border` - Similar to `raised` but the shadow is replaced with a
-#    more subtle border.
-# 
-# Changing this value at runtime will only affect new windows.
-adw-toolbar-style = raised
-
-# If `true` (default), then the Ghostty GTK tabs will be "wide." Wide tabs
-# are the new typical Gnome style where tabs fill their available space.
-# If you set this to `false` then tabs will only take up space they need,
-# which is the old style.
-gtk-wide-tabs = true
-
-# If `true` (default), Ghostty will enable Adwaita theme support. This
-# will make `window-theme` work properly and will also allow Ghostty to
-# properly respond to system theme changes, light/dark mode changing, etc.
-# This requires a GTK4 desktop with a GTK4 theme.
-# 
-# If you are running GTK3 or have a GTK3 theme, you may have to set this
-# to false to get your theme picked up properly. Having this set to true
-# with GTK3 should not cause any problems, but it may not work exactly as
-# expected.
-# 
-# This configuration only has an effect if Ghostty was built with
-# Adwaita support.
-gtk-adwaita = true
-
-# If `true` (default), applications running in the terminal can show desktop
-# notifications using certain escape sequences such as OSC 9 or OSC 777.
-desktop-notifications = true
-
-# If `true`, the bold text will use the bright color palette.
-bold-is-bright = false
-
-# This will be used to set the `TERM` environment variable.
-# HACK: We set this with an `xterm` prefix because vim uses that to enable key
-# protocols (specifically this will enable `modifyOtherKeys`), among other
-# features. An option exists in vim to modify this: `:set
-# keyprotocol=ghostty:kitty`, however a bug in the implementation prevents it
-# from working properly. https://github.com/vim/vim/pull/13211 fixes this.
-term = ghostty
-
-# String to send when we receive `ENQ` (`0x05`) from the command that we are
-# running. Defaults to an empty string if not set.
-enquiry-response = 
-
-# Control the auto-update functionality of Ghostty. This is only supported
-# on macOS currently, since Linux builds are distributed via package
-# managers that are not centrally controlled by Ghostty.
-# 
-# Checking or downloading an update does not send any information to
-# the project beyond standard network information mandated by the
-# underlying protocols. To put it another way: Ghostty doesn't explicitly
-# add any tracking to the update process. The update process works by
-# downloading information about the latest version and comparing it
-# client-side to the current version.
-# 
-# Valid values are:
-# 
-#  * `off` - Disable auto-updates.
-#  * `check` - Check for updates and notify the user if an update is
-#    available, but do not automatically download or install the update.
-#  * `download` - Check for updates, automatically download the update,
-#    notify the user, but do not automatically install the update.
-# 
-# The default value is `check`.
-# 
-# Changing this value at runtime works after a small delay.
-auto-update = off
-
-# The release channel to use for auto-updates.
-# 
-# The default value of this matches the release channel of the currently
-# running Ghostty version. If you download a pre-release version of Ghostty
-# then this will be set to `tip` and you will receive pre-release updates.
-# If you download a stable version of Ghostty then this will be set to
-# `stable` and you will receive stable updates.
-# 
-# Valid values are:
-# 
-#  * `stable` - Stable, tagged releases such as "1.0.0".
-#  * `tip` - Pre-release versions generated from each commit to the
-#    main branch. This is the version that was in use during private
-#    beta testing by thousands of people. It is generally stable but
-#    will likely have more bugs than the stable channel.
-# 
-# Changing this configuration requires a full restart of
-# Ghostty to take effect.
-# 
-# This only works on macOS since only macOS has an auto-update feature.
-auto-update-channel = 
-
diff --git a/dot-config/wallust/templates/ghostty.conf b/dot-config/wallust/templates/ghostty.conf
new file mode 100644
index 00000000..721e7555
--- /dev/null
+++ b/dot-config/wallust/templates/ghostty.conf
@@ -0,0 +1,20 @@
+background = {{background}}
+foreground = {{foreground}}
+cursor-color = {{cursor}}
+
+palette = 0={{color0}}
+palette = 1={{color1}}
+palette = 2={{color2}}
+palette = 3={{color3}}
+palette = 4={{color4}}
+palette = 5={{color5}}
+palette = 6={{color6}}
+palette = 7={{color7}}
+palette = 8={{color8}}
+palette = 9={{color9}}
+palette = 10={{color10}}
+palette = 11={{color11}}
+palette = 12={{color12}}
+palette = 13={{color13}}
+palette = 14={{color14}}
+palette = 15={{color15}}
diff --git a/dot-config/wallust/wallust.toml b/dot-config/wallust/wallust.toml
index 3790aea8..45835d82 100644
--- a/dot-config/wallust/wallust.toml
+++ b/dot-config/wallust/wallust.toml
@@ -32,9 +32,11 @@ kvantum.target = "~/.config/Kvantum/KvArcDark#/KvArcDark#.kvconfig"
 pywal.template = "pywal.json"
 pywal.target = "~/.cache/wal/colors.json"
 
-xdpl.template = "xdpl.conf"
-xdpl.target = "~/.config/xdg-desktop-portal-luminous/config.toml"
+# xdpl.template = "xdpl.conf"
+# xdpl.target = "~/.config/xdg-desktop-portal-luminous/config.toml"
 
+ghostty.template = "ghostty.conf"
+ghostty.target = "~/.config/ghostty/colors.conf"
 
 
 # alacritty.template = "alacritty.toml"